SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDSHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD

400-8127-833shanghai@yr17.netNo.1478 Nanfeng Highway, Fengcheng Town, Fengxian District, Shanghai 201411, Chinawww.yr17.net

Updated 2026-11-12 · Model HMAS-30

Hardness Testers

PREMIUMBUILDMICROCREModel HMAS-30Also available as a premium build: higher accuracy and calibration standard

Intelligent Automatic Vickers Hardness Tester (HMAS-30, HMAS-30Z)

Updated 2026-11-12Category Hardness Testers

硬度测试范围0–6000HV

测量误差1% 以内(国标为 3% )

ModelHMAS-30

CategoryHardness Testers

Get Quote & Selection Advice Generate a measurement plan

Same seriesHMAS-UHT1700CM HMAS-D HMAS-DS HMAS-DSZ HMAS-DSM View all

400-8127-833 Generate proposal

Genuine Product

Nationwide Shipping

1-Year Warranty

VAT Invoice Available

Overview

No translation available yet — Chinese original below Full description (Chinese original) ↓

Page summary:Intelligent Automatic Vickers Hardness Tester (HMAS-30, HMAS-30Z) is a Hardness Testers product (model HMAS-30), manufactured by Shanghai Microcre Optics-Mech Tech Co., Ltd. Key specifications: 硬度测试范围 = 0-6000HV; 试验力施加方法 = Sensor automatic; Magnification = 100×,200x; Dwell Time = 0 ～ 60s (每秒为一单位，任意键入); 测量误差 = 1% 以内(国标为 3% ); Max Specimen Height = 220mm. Contact: 400-8127-833 / shanghai@yr17.net.

For detailed datasheets in English, please contact our sales engineers.

HMAS-30 Specifications

0–6000HV硬度测试范围

1% 以内(国标为 3% )测量误差

Measuring capability2

What it can measure — the first thing to check against your samples

硬度测试范围: 0 – 6000HV
试验力施加方法: Sensor automatic

Accuracy & resolution1

Error, repeatability and smallest reading — whether data can be used for acceptance

测量误差: 1% 以内(国标为 3% )

Optics & imaging1

Objectives, eyepieces, illumination and field of view

Magnification: 100×,200x

Structure & travel2

Stage, travel, dimensions and weight — siting and fixturing

Max Specimen Height: 220mm
Overall dimensions (L × W × H): (520×190×650)mm

Loading & control1

Loading mode, speed, dwell and software interfaces

Dwell Time: 0 ～ 60s (每秒为一单位，任意键入)

Power & environment1

Power, consumption and ambient requirements

Power Supply: AC220V/50Hz

Accessories & configuration1

Standard, optional and supplied-with items

Main unit weight: Approx. 40Kg

Other1

Additional notes

压头中心到外壁距离: 130mm

Specifications vary with configuration — confirm the final technical agreement with our engineer. Optional items are priced separately.

硬度测试范围	0-6000HV
试验力施加方法	Sensor automatic
Magnification	100×,200x
Dwell Time	0 ～ 60s (每秒为一单位，任意键入)
测量误差	1% 以内(国标为 3% )
Max Specimen Height	220mm
压头中心到外壁距离	130mm
Main unit weight	Approx. 40Kg
Power Supply	AC220V/50Hz
Overall dimensions (L × W × H)	(520×190×650)mm

Some specification values are given in the original Chinese wording; ask our engineers for an English datasheet.

Full description (Chinese original)

The English text on this page summarises the model and specifications. The full technical description is the Chinese original below; an English datasheet is available from our engineers on request.

一、产品简介

HMAS 系列智能自动维氏硬度计是光机电一体化的高新技术产品，具有良好的可靠性，可操作性，是小负荷维氏硬度计的前沿科技新产品。

该机采用高精度力传感器闭环控制系统，试验力更精准；高倍率光学采集系统，搭配高清成像系统，压痕更清晰，便于测量；同时采用电脑软件侧容量，避免人眼疲劳误差，硬度测量更精确。

本机适用于测量微小、薄形试件、表面渗镀层处理后的零件，是科研机构、工厂及质检部门进行研究和检测的理想的硬度测试仪器。

二、产品特点

传感器闭环控制开机即用，电动加载，无需安装砝码调试
电脑软件测量，操作直观测量简单方便
仪器配备高清图像采集系统，将仪器内部采集压痕图像转换进入电脑软件中心
本仪器配备了研润公司开发的硬度测量分析系统。避免人眼疲劳误差，硬度测量更精确

三、主要技术参数

硬度测试范围： 0-6000HV
试验力施加方法：传感器自动
放大倍率： 100×,200x
试验力保荷时间： 0 ～ 60s（每秒为一单位，任意键入）7、最小检测单位： 0.26μm
测量误差： 1% 以内（国标为 3%）.
试件最大高度： 220mm
压头中心到外壁距离： 130mm
主机重量：约 40Kg
电源： AC220V/50Hz
外型尺寸（长 × 宽 × 高）： (520×190×650)mm 四、产品装箱单：
主机（包括维氏压头一只， 10X 物镜一只，微电脑控制器，数据线，出厂前默认装到机器上）2、品牌笔记本电脑 1 套（含电源）3、硬度测量系统软件（已装到电脑，并在硬盘备份。）4、高清图像采集系统 1 套 ( 含数据线）5、大、中 “V” 型试台各 1 只
水平调节螺钉 4 只
电源线 1 根
维氏硬度块 2 块
备用保险丝 2A 2 只
产品合格证 1 份
产品使用说明书 1 份

Applicable standards

本机型的设计与验收依据下列标准；采购文件引用时请注明版本年份。

GB/T 4340.1Metallic materials — Vickers hardness test — Part 1: Test method试验方法 ISO 6507-1Metallic materials — Vickers hardness test国际标准 JJG 151Verification Regulation of Metallic Vickers Hardness Testers检定规程 GB/T 230.1Metallic materials — Rockwell hardness test — Part 1: Test method试验方法 GB/T 231.1Metallic materials — Brinell hardness test — Part 1: Test method试验方法 GB/T 17394.1Metallic materials — Leeb hardness test — Part 1: Test method试验方法 GB/T 18449.1Metallic materials — Knoop hardness test — Part 1: Test method试验方法 GB/T 21838.1Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method试验方法

查看完整标准库 →

Selection FAQ

Can the configuration of HMAS-30 be adapted to my application?

Yes. Beyond the standard configuration, measuring range, fixtures, optics and software functions can be adapted. Send your sample and test requirements and our engineers will return a configuration list and quotation.

Can I test my samples before ordering?

Yes. Samples can be mailed to our Shanghai Fengxian laboratory for free testing with a written report, or you can book an on-site demonstration to confirm the workflow and data format.

How are lead time, installation and after-sales service handled?

Standard configurations usually ship within 15-30 working days, including first installation, commissioning and operator training. The instrument carries a one-year warranty and software upgrades are free for life.

General information only — final configuration and applicable conditions are subject to the mutually confirmed technical document.

After-Sale & Selection Support

Sample Testing

Free testing of mailed samples
Factory demo by appointment
Written test proposal provided

Delivery & Training

Free first installation & commissioning
On-site operation training
One-year full warranty

Custom Builds

Fixtures, ranges and software customizable
Automation line integration
Lifetime free software upgrades