SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDSHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD

400-8127-833shanghai@yr17.netNo.1478 Nanfeng Highway, Fengcheng Town, Fengxian District, Shanghai 201411, Chinawww.yr17.net

Updated 2026-11-12

Hardness Testers

PREMIUMBUILDMICROCREAlso available as a premium build: higher accuracy and calibration standard

Webster Hardness Tester

Updated 2026-11-12Category Hardness Testers

CategoryHardness Testers

CustomizationCustom builds supported

Get Quote & Selection Advice Generate a measurement plan

Same series934-1 HBa-1 LX-A-D LXS-A-D HLX-A/C View all

400-8127-833 Generate proposal

Genuine Product

Nationwide Shipping

1-Year Warranty

VAT Invoice Available

Overview

No translation available yet — Chinese original below Full description (Chinese original) ↓

Page summary:Webster Hardness Tester is a Hardness Testers product, manufactured by Shanghai Microcre Optics-Mech Tech Co., Ltd. Key specifications: W -20a = 厚度 0.6-13 内径 >10; W-20b = 厚度 0.6-8 内径 >6; W-B75b = 厚度 0.6-8 内径 >6; W-BB75b = 厚度 0.6-8 内径 >6. Contact: 400-8127-833 / shanghai@yr17.net.

For detailed datasheets in English, please contact our sales engineers.

Webster Hardness Tester Specifications

Other4

Additional notes

W -20a: 厚度 0.6-13 内径 >10
W-20b: 厚度 0.6-8 内径 >6
W-B75b: 厚度 0.6-8 内径 >6
W-BB75b: 厚度 0.6-8 内径 >6

Specifications vary with configuration — confirm the final technical agreement with our engineer. Optional items are priced separately.

W -20a	厚度 0.6-13 内径 >10
W-20b	厚度 0.6-8 内径 >6
W-B75b	厚度 0.6-8 内径 >6
W-BB75b	厚度 0.6-8 内径 >6

Some specification values are given in the original Chinese wording; ask our engineers for an English datasheet.

Full description (Chinese original)

The English text on this page summarises the model and specifications. The full technical description is the Chinese original below; an English datasheet is available from our engineers on request.

一、W 系列韦氏硬度计产品简介

W 系列韦氏硬度计一种可现场快速测试铝合金硬度的仪器。使用方便，一卡即可，硬度值直接读出，效率高，可靠性好。用于快速检测铝合金型材、管材、板材、铝工件及其他软金属的硬度。

特别适于在生产现场、销售现场或施工现场对成批产品进行快速、非破坏性的逐件合格检查。本韦氏硬度计是检验铝合金型材力学性能的首选仪器，符合中国有色标准 YS/T420-2004 和美国标准 ASTM B647-84（2000）。

韦氏硬度计还可用于测试紫铜、黄铜、软钢等。

二、W 系列韦氏硬度计仪器特点 1、压针

新材料、新工艺制造的压针，硬度高，寿命长，互换性好。

指针：高强度的指针，长期使用或错误操作都不易弯曲变形
手柄：锻造材料，表面阳极氧化的上手柄，美观、耐磨、耐污染
硬度块：标准硬度块经过标准硬度机检测，附有检测报告
高质量：精细的零件加工，精密的整机装配，严格的质量检验
稳定性好：满度点稳定，校正点稳定，指针无“爬行”

三、W 系列韦氏硬度计应用说明

W-20 型常用于铝型材的生产和应用场合
当铝型材厚度大于 6mm 时应改用 W -20a 型
内径大于 10mm 的铝管材采用 W-20 型
内径大于 6mm 的细铝管应改用 W-20b 型
W-B75 型常用于测试黄铜管
W-BB75 型常用于测试紫铜管
W-B92 型常用于测试不锈钢带或冷轧钢带

四、W 系列韦氏硬度计技术参数

1、量程： 0~20HW（相当于 20~110HRE）2、示值误差： 0.5HW（5~17HW）3、重复性误差： 0.5HW（5~17HW）4、重量： 0.5kg

Applicable standards

本机型的设计与验收依据下列标准；采购文件引用时请注明版本年份。

GB/T 17394.1Metallic materials — Leeb hardness test — Part 1: Test method试验方法 JJG 747Verification Regulation of Leeb Hardness Testers检定规程 GB/T 230.1Metallic materials — Rockwell hardness test — Part 1: Test method试验方法 GB/T 231.1Metallic materials — Brinell hardness test — Part 1: Test method试验方法 GB/T 4340.1Metallic materials — Vickers hardness test — Part 1: Test method试验方法 GB/T 18449.1Metallic materials — Knoop hardness test — Part 1: Test method试验方法 GB/T 21838.1Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method试验方法 ISO 14577-1Metallic materials — Instrumented indentation test for hardness and materials parameters国际标准

查看完整标准库 →

Selection FAQ

Can the configuration of Webster Hardness Tester be adapted to my application?

Yes. Beyond the standard configuration, measuring range, fixtures, optics and software functions can be adapted. Send your sample and test requirements and our engineers will return a configuration list and quotation.

Can I test my samples before ordering?

Yes. Samples can be mailed to our Shanghai Fengxian laboratory for free testing with a written report, or you can book an on-site demonstration to confirm the workflow and data format.

How are lead time, installation and after-sales service handled?

Standard configurations usually ship within 15-30 working days, including first installation, commissioning and operator training. The instrument carries a one-year warranty and software upgrades are free for life.

General information only — final configuration and applicable conditions are subject to the mutually confirmed technical document.

After-Sale & Selection Support

Sample Testing

Free testing of mailed samples
Factory demo by appointment
Written test proposal provided

Delivery & Training

Free first installation & commissioning
On-site operation training
One-year full warranty

Custom Builds

Fixtures, ranges and software customizable
Automation line integration
Lifetime free software upgrades